PDA

View Full Version : new cleats



mike o
06-05-2009, 07:35 PM
Well I installed pull up cleats tonite on the 95 16'. Gettin ready for the QUEEN:kingme: and I knew the OEM ones were gonna get me someday.:shocking: I removed the screws and the screw holes were a little wet, 1/2 balsa core lamination. Somebody didnt seal the holes cause the screws came right out, no goop. When I cut out the hole... the whole piece was saturated like a sponge.:frown: The wet stuff is removed now. Dried it up and sealed the new.:kingme: Ya might want to check your own.....maybe.:eek:

gcarter
06-05-2009, 07:42 PM
That's a good point Mike.