donzi logo size on minx

[rbarna]

What size are the DONZI logos near the stern of the MINX? Need to know height and width.

Thanks!

-Ross

[VetteLT193]

I think, from memory, 4" tall. I just printed a set... I did a slightly newer logo so I can't respond to the width.

If you aren't picky I can help you out in a couple of weeks...

[A3GR]

I happen to have a set of DONZI logo's from 1987 and they measure 3 1/2" high and 19 1/8" long.

[VetteLT193]

3.5 makes sense, I think I'm remembering 4" as the size of the area that they go on, from the 'ridge' to the bottom of the curve of the rub rail where the hull goes flat

[VetteLT193]

Here's mine, just installed. I updated the look a bit

[Planetwarmer]

Any idea of what size the logos are on the Shelby boats? I thought I might have some water jetted' out of stainless for my 1987 22C. I figured it would update it it a bit. What do you fellers think?

[JustMercMe]

Any idea of what size the logos are on the Shelby boats? I thought I might have some water jetted' out of stainless for my 1987 22C. I figured it would update it it a bit. What do you fellers think?

Contact zelatore here on the board.....He was selling some stainless sets back last year I think.

I also have the measurements at the house if you wanna make your own.

[JustMercMe]

Here's mine, just installed. I updated the look a bit
I like the idea of Donzi under the nose like the big boys!

[Planetwarmer]

Contact zelatore here on the board.....He was selling some stainless sets back last year I think.

I also have the measurements at the house if you wanna make your own.

If you don't mind, I would love to have the measurements of the logos off of a Shelby boat. I have a friend that will make them for me very cheap.

Sorry for the high-jacking.

BTW, I do like the updated look, VetteLT193.

[VetteLT193]

here you go... in the water.

[The Hedgehog]

here you go... in the water.

Great looking boat. I was impressed with it in person.

Those red powdercoat tabs should help

[VetteLT193]

Great looking boat. I was impressed with it in person.
Those red powdercoat tabs should help

Ironically, I was just sizing the tabs up outside :wink: thanks for the compliments.... sorry you broke down too. We have to get a number network for next time. we were already in the car running back, we could have helped had we known:bonk:

[gcarter]

Here's what I did on my Minx. I did the design on Illustrator and had the local sign company make and install them.

http://www.donzi.net/forums/attachment.php?attachmentid=24264&d=1159816430