View Full Version : finding out who made hatch hinges
smallblockford
05-09-2009, 07:28 AM
i am wrapping up my 16 and i need the hatch hinges having problems finding them. they are the 3 screw left and rights that were used for yrs. i have 2 screws hinges laying every were from perko but i can not find the 3 screw wider hinges that were on the boat
please help just tell me who made them even.
i am going to have to post some pics of a donzi i am doing for a guy complete uph. on a 22 widow cabin bolsters everything
thanks
chappy
05-09-2009, 08:52 AM
Try 570 639 2628.
Ask for Jamie.
www.Lakesiderestorations.com (http://www.Lakesiderestorations.com)
If he can't find them, he may know who can.
Good luck, and let's see some pics.:cool!:
mattyboy
05-09-2009, 10:13 AM
I think there is a company in MI who casts them they are raw and would have to go to the chrome vat.
algonac I think is the name
Algonac Cast Products 810-794-9391
They were reluctant to sell direct but finally relented.
Part numbers 16041, 16040 -left and right. About $50 each and already chrome plated.
smallblockford
05-09-2009, 03:31 PM
thank you bob i have 3 out of 4 there is a male and female end on one side needless to say i am missing one and screwed after the build up of my boat.
i will post pics again as soon as i dig her out i am in the process of making my own baffles for the small block gil off shore dry headers so i can try to run it on the lake with out having every water cop after me.
had it out last yr and you could hear the boat 4 miles away.
i also have great pics of this black widow i am doing for a guy that i am going to post.
Let me clarify. A complete hinge (2 pieces) was $50. Left and right refers to which way the male part of the hinge is pointing. Your lucky, the dual hatches on my Hornet took 4.
mike o
05-09-2009, 06:10 PM
Hey smallblock, Long time no see. How your woop- a$$ 16? :lightning
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.