PDA

View Full Version : Minx seat questions



rbarna
05-04-2009, 10:25 PM
A few seat questions for the Minx LE:

What is the width of the front seats in the Minx LE?
Is this the right slider system:
http://www.wholesalemarine.com/p/GAR-75080/
http://www.wholesalemarine.com/mm5/graphics/00000001/GAR-75080_med.jpg

Is this possible or won't work due to lack of room:
http://www.wholesalemarine.com/p/GAR-75096/
http://www.wholesalemarine.com/mm5/graphics/00000001/GAR-75096_med.jpg

Woah, check this out, suspension!
http://www.discountmarinesupplies.com/Slides_Swivels-GARELICK_ACTIVE_SEAT_SUSPENSION.html
http://www.discountmarinesupplies.com/24143347.jpg

gcarter
05-05-2009, 05:51 AM
A few seat questions for the Minx LE:

What is the width of the front seats in the Minx LE?
Is this the right slider system:
http://www.wholesalemarine.com/p/GAR-75080/
http://www.wholesalemarine.com/mm5/graphics/00000001/GAR-75080_med.jpg

Is this possible or won't work due to lack of room:
http://www.wholesalemarine.com/p/GAR-75096/
http://www.wholesalemarine.com/mm5/graphics/00000001/GAR-75096_med.jpg

Woah, check this out, suspension!
http://www.discountmarinesupplies.com/Slides_Swivels-GARELICK_ACTIVE_SEAT_SUSPENSION.html
http://www.discountmarinesupplies.com/24143347.jpg
The top one is the way to go. The handle and everything fits fine. The knob is under the seat so you won't trip over them. The rest will raise your body into the slip stream and then you're just like in a stock 22 as far as wind goes anyway.
Here's a link to a method to mount them.

http://www.donzi.net/forums/showthread.php?t=33784

VetteLT193
05-05-2009, 07:11 AM
Maybe I'm the odd guy out, but there isn't that much room in the boat to slide the seat anyway. I set it and forget it with a bolt on the factory 'sliders'