View Full Version : Need a couple of measurements please...
CHACHI
05-04-2009, 01:37 PM
....on a 22c, need the distance from the front edge of the engine hatch to the transom and from the transom to the helm/dash.
Thanks in advance.
Ken
gcarter
05-04-2009, 03:49 PM
Ken, what you're really asking is the dimension from the hatch sitting in the deck opening to the aft end of the deck, right?
And then from that same point on the aft end of the deck to the dash?
CHACHI
05-04-2009, 07:09 PM
George, that is correct.
Ken
Whaacha doin', Chachi??? :wink:
:beer:
Maybe you are taking some measurements to fabricate an ejectable canopy pod, designed to skip across the water a bit more efficiently than the human body? :) :lifeprese: :) :lifeprese: :) :lifeprese: :)
:beer:
gcarter
05-05-2009, 05:52 AM
Oooops! Is the cat out of the bag?
CHACHI
05-05-2009, 06:13 AM
Yeah, that's it. The canopy mod is now out in the open.
Ken
Quit fooling around and let the cat out of the bag! I am still soaked from going out last night to measure!!:umbrella:
Maybe you are taking some measurements to fabricate an ejectable canopy pod, designed to skip across the water a bit more efficiently than the human body? :) :lifeprese: :) :lifeprese: :) :lifeprese: :)
:beer:
Giggle Giggle Tony I almost forgot that issue!!!!!!!!!!!!!!!!!!!!!!!!!!!
yeller
05-06-2009, 11:21 AM
Quit fooling around and let the cat out of the bag! I am still soaked from going out last night to measure!!:umbrella:So Ken, MOP got you the measurements? Need anything else? It's not raining here. :biggrin.:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.