How Are CMIs Pressure Tested?

[Carl C]

I need to do it.

[mrfixxall]

I need to do it.


Cap off the water outlet with a rubber cap and a hose clamp. then take a old garden hose and cut the end off,you may have to make a adaptor to fit where the water goes into the header, then hook the hose to your spicket and turn it on,look inside the header for leaks..

[BUIZILLA]

plumb it like Fixxy says but use air and submerge them in a HUGE cooler filled with water

or your bathtub will do, if the dogs allow that..

[Carl C]

plumb it like Fixxy says but use air and submerge them in a HUGE cooler filled with water

or your bathtub will do, if the dogs allow that.. Fill them with compresed air and look for bubbles?

[BUIZILLA]

10-4... use 35# air pressure, if there's a leak you'll find it light years faster that way than looking for any sweating...

[Carl C]

10-4... use 35# air pressure, if there's a leak you'll find it light years faster that way than looking for any sweating...

OK, will do that this week. Maybe today. Thanks.