PDA

View Full Version : Help a ZX brother out



The Hedgehog
04-07-2009, 03:30 PM
Does anyone know the length of the tab indicator cables for a 26ZX or 28ZX (should be the same).

mrfixxall
04-07-2009, 04:28 PM
Does anyone know the length of the tab indicator cables for a 26ZX or 28ZX (should be the same).

it should read it on the old cables,lets say the part number is 240-460 or visa-versa that cable would be a 20' cable..the 240 would be 240 inches

The Hedgehog
04-07-2009, 04:45 PM
it should read it on the old cables,lets say the part number is 240-460 or visa-versa that cable would be a 20' cable..the 240 would be 240 inches

It is getting tabs and indicators for the first time.

Fix, do you know where the number will be located? I am hoping that one of my ZX brothers can take a peek and give me the number. I am figuring that the scorp guys should have it.

Trueser
04-07-2009, 04:53 PM
I would rather you get the correct size. Otherwise you will have more or less than you need.

I plan on ordering new ones this week. I will send you a note on the size.

mrfixxall
04-07-2009, 05:44 PM
It is getting tabs and indicators for the first time.
Fix, do you know where the number will be located? I am hoping that one of my ZX brothers can take a peek and give me the number. I am figuring that the scorp guys should have it.


if they have morris cables which most do it would be stampped on the outside of the cable its self..both cables are differant legnths..one was 22' the other was 28' on a 27' formula.

The Hedgehog
04-07-2009, 05:50 PM
I would rather you get the correct size. Otherwise you will have more or less than you need.

I plan on ordering new ones this week. I will send you a note on the size.

Thanks. Please let me know what you find out.

The Hedgehog
04-07-2009, 05:51 PM
if they have morris cables which most do it would be stampped on the outside of the cable its self..both cables are differant legnths..one was 22' the other was 28' on a 27' formula.

That sounds about right. I was told that the difference was 5 feet or so.

FISHIN SUCKS
04-07-2009, 09:55 PM
Wish I could help ya buddy, but the boat is at the shop gettin a beefed up sound system and a brake light, among other things.

gero1
04-08-2009, 06:38 AM
brake light?????? how bout a back up buzzer

FISHIN SUCKS
04-08-2009, 09:24 PM
brake light?????? how bout a back up buzzer
we did think about it, but decided again' it. It is funny though:kingme:, shouldnt every boat have a backup buzzer:confused:

The Hedgehog
04-14-2009, 09:12 AM
Anyone,

I need to get it ordered.

Trueser
04-14-2009, 10:04 AM
Let me have Matt look tonight.

I also need to order new ones. 33C

Sorry. I ran into other projects last week.

The Hedgehog
04-14-2009, 03:57 PM
Let me have Matt look tonight.

I also need to order new ones. 33C

Sorry. I ran into other projects last week.

Perfect, please let me know. I have to get it ready for AOTH

Trueser
04-15-2009, 12:05 PM
Ok 22' and 26'

This was off the 29. may be a little long for you. I still plan on looking at the 28 just need a few more days.

Try to measure with a string or use wire.


good Luck

SilverBack
04-15-2009, 06:34 PM
What tabs are you going with? Does Eddie think that the indicators are going to work for you?

The Hedgehog
04-15-2009, 08:29 PM
What tabs are you going with? Does Eddie think that the indicators are going to work for you?

I found a deal on some 280K-Planes. If those are not enough I plan to put on some 380 plates.

Yes, he seems to think that the idicators will be fine. I am going full morse cable.

It is good to see you back