PDA

View Full Version : What would it take...



Donziweasel
02-03-2009, 07:27 AM
Got my 6.2L back on Ebay and was asked this question-


got a 96 u17 with 4.3. what will be required to mate it to the volvo sx drive? I had a u17 with a 302 efi, it ran 65gps, so I know there should be room in the engine compartment for a v8..

Anyone know? BTW, I think this would be a great engine for a U-17. If he got 65 with a 302, should push him north of 70 with a 6.2L.

mattyboy
02-03-2009, 07:54 AM
first would be a v 8 ration outdrive, not sure on the sx if it is like the old 200 aquamatics and the ratio was done in the lower , second would probably be a motor mount move. third would be an exhaust is the 4.3 thru hull and was the 6.2 thru hull??

HOWARD O
02-03-2009, 08:39 AM
Coincidence?

http://www.donzi.net/forums/showthread.php?t=55997

Donziweasel
02-03-2009, 08:55 AM
No, not a coincidence. Name was the same from ebay as syclone01.

mrfixxall
02-03-2009, 12:46 PM
John,it should drop rite in,may have to move the motor mounts forward(but may not have to) and a gear change in the lower unit..