PDA

View Full Version : need a quick answer....



Donziweasel
01-31-2009, 03:46 PM
My engine auction on ebay ends in a couple of hours. Guy has a 5.7L Merc with a Bravo III. My drive behind this engine was a Bravo. Will the Bravo III bolt up? I would think it would.

Planetwarmer
01-31-2009, 04:14 PM
try googleing the two drives, and look for the schematics. I have no idea, or I would help.

osur866
01-31-2009, 04:49 PM
Uhh, is this a std. BIII? Don't you want the BIII XR behind that 540? Just thinking. Steve

MOP
01-31-2009, 04:53 PM
I am pretty darn sure it will, the gimbles are the same for Bravo and Blackhawk that I know first hand. I doubt they had anything different for the III.

Donziweasel
01-31-2009, 05:08 PM
Uhh, is this a std. BIII? Don't you want the BIII XR behind that 540? Just thinking. Steve
__________________

Steve, it is not for me. I have my 6.2L on Ebay with about 2 hours left in the Auction. A guy with a Chaparell with a 350 and a Bravo III was wondering if my 6.2L would bolt up. I told him I was pretty sure it would

First the Critter is getting the engine, then steering, then possibly a Bravo III XR. I have never heard a bad thing about the Volvo Duo Prop or the Bravo III on Donzi's. Morgans Cloud loves his Duo. Interested to possibly try one. Got a new Bravo on it right now with only 18 hours.

MOP
01-31-2009, 05:31 PM
Bell housing is the same all chevies use the same bolt pattern.

Donziweasel
01-31-2009, 05:33 PM
Thanks Phil. I was thinking the same thing.:)