Gunwale mounted shifter..?

[fogducker III]

Who other than Livorsi makes a quality side mount shift/throttle control with trim switch that is compatable with merc?

I like the Livorsi but the unit with Merc cover plate, all in is over $500....:eek:

[VetteLT193]

The only other option that might work, assuming you want the bling, is to add a fiberglass pod and go top mount.

But, the pod is about $100 so you have to find a deal on a top mount or you will be in for the same price.

The rest of the side mounts that I have seen are much more than the Livorsi unit.

[BUIZILLA]

Uflex

[fogducker III]

Uflex


Nice units, good prices, but they look like my Merc 3000 series unit.......:garfield:

[BUIZILLA]

they are light years better than the Merc

or I would not have used it

ask Lenny, you'll see....

[fogducker III]

they are light years better than the Merc

or I would not have used it

ask Lenny, you'll see....


I will do some more "research".......... tanks..........:wink:

[Mr X]

Dana Marine

[fogducker III]

Dana Marine


$800 ++++++++ :eek::frown:

[Air 22]

http://www.cassellmarine.com.au/p/366945/dana---side-mount-billet-throttle-shifter.html
$1099.00:pimp:
I went with Livorsi...$435.00 not bad...ask for Kirk @ elite marine...he'll take care of ya...:wink:
http://shop.elitemarineonline.com/product.sc;jsessionid=54233027A7209742D4B88922D674 4380.qscstrfrnt04?categoryId=15&productId=55

[boxy]

http://www.cassellmarine.com.au/p/366945/dana---side-mount-billet-throttle-shifter.html
$1099.00:pimp:
I went with Livorsi...$435.00 not bad...ask for Kirk @ elite marine...he'll take care of ya...:wink:
http://shop.elitemarineonline.com/product.sc;jsessionid=54233027A7209742D4B88922D674 4380.qscstrfrnt04?categoryId=15&productId=55


Ummmm FlyBoy, those Dana prices are in Australian Dollars .... :D

[fogducker III]

Ummmm FlyBoy, those Dana prices are in Australian Dollars .... :D


LMFAO..........I heard he likes it "down under"........:eek:

Dana are nice units but WAY more $$$ tthan I am able to spend, the merc unit I have now works fine but is a little "sloppy" the Livorsi is nice but still big bucks........does the Livorsi hook straight up to the merc cable ends???

[VetteLT193]

LMFAO..........I heard he likes it "down under"........:eek:

Dana are nice units but WAY more $$$ tthan I am able to spend, the merc unit I have now works fine but is a little "sloppy" the Livorsi is nice but still big bucks........does the Livorsi hook straight up to the merc cable ends???

I don't think any of them do. 33 series cables, plus you need an adapter for the engine compartment connections.

By the time you are done, it is not a cheap proposition.

[Air 22]

Ummmm FlyBoy, those Dana prices are in Australian Dollars .... :D
Nicole Kidman is from down under..lol:)

[roadtrip se]

Uflex

I looked into this alternative for Jill's boat, because she was complaining about how hard it was to throttle her Scorpion, then I sold it, and never did it.

But, a friend shipped me a uflex unit on consignment and it WAS the Livorsi lever. It also had all of the attachment points for Mercury. Of course it didn't have all of the bling of the Livorsi unit. Bling costs money, just ask Air 22.

[VetteLT193]

I looked into this alternative for Jill's boat, because she was complaining about how hard it was to throttle her Scorpion, then I sold it, and never did it.
But, a friend shipped me a uflex unit on consignment and it WAS the Livorsi lever. It also had all of the attachment points for Mercury. Of course it didn't have all of the bling of the Livorsi unit. Bling costs money, just ask Air 22.

I didn't realize that it accepted other cables, I stand corrected... did some searching and found this on the Livorsi

- Control accepts 33C type cables as well as
Mercury, Yamaha, Evinrude and others

I wish they were all like that. PITA to change the cables out.

[boxy]

Nicole Kidman is from down under..lol:)

Down under Nicole Kidman :yes::party::yes:

[Air 22]

Down under Nicole Kidman :yes::party::yes:

Hey she is one of my clients...easy....:pimp:

[Air 22]

LMFAO..........I heard he likes it "down under"........:eek:

.......does the Livorsi hook straight up to the merc cable ends???


Yep...:yes: comes with a connection kit:)

[boxy]

Hey she is one of my clients...easy....:pimp:
I have nothing but respect and admiration for Ms Kidman as a person and a parent.
Still doesn't stop her from being hella sexy though ..... :kingme:

[Air 22]

I have nothing but respect and admiration for Ms Kidman as a person and a parent.
Still doesn't stop her from being hella sexy though ..... :kingme:
:yes::yes::yes:

[MDonziM]

I put in the Dana in last year. Real happy with the action but it was expensive and took a little work to install. I have 94' vintage cables and the tie in to the new shifter was not easy.

[harbormaster]

I really like the livorsi side shifter unit. The photos REALLY DO NOT DO THEM JUSTICE!!
The Other seperate shifter unit will be harder to use since Livorsi ran out of the mounting pods and will not be getting more (according to Mike Livorsi). I personally have the pod on my 22 and like it alot.
I can sell these shifters to Registry members for 25% off retail.
Call me at the office or my cell if you have questions. As always I can kick anyone's ass on Livorsi pricing. I am not a dealer. I am a distributor.

[fogducker III]

Thanks Scott, are you able to send me your phone number? Are you able to get the shifter in Teal..?:wink:

[justleft]

Check out In-Control http://www.incontrolequipment.com/products.asp?ProdID=15

Pricey but absolutely top quality. Works great. Gotta love the seperate
shift and throttle.

Mine has the trim in the throttle. The stock cables worked. I made a
backing plate to cover the old quicksilver hole.

[fogducker III]

Check out In-Control http://www.incontrolequipment.com/products.asp?ProdID=15

Pricey but absolutely top quality. Works great. Gotta love the seperate
shift and throttle.

Mine has the trim in the throttle. The stock cables worked. I made a
backing plate to cover the old quicksilver hole.

I do like the look of those, couldn't find prices...?

Which one is the model with the trim switch?

[justleft]

Give them a call.

Here's a picture of my early install. I have made a cleaner backing plate since. Bottom of page 1.

http://www.donzi.net/forums/showthread.php?t=49774&highlight=shifter+throttle

[fogducker III]

Give them a call.

Here's a picture of my early install. I have made a cleaner backing plate since. Bottom of page 1.

http://www.donzi.net/forums/showthread.php?t=49774&highlight=shifter+throttle


Nice install, that looks great!

When it is all said and done, shipping, taxes, exchange etc. I wouldn't see change from $1100...................!!:garfield:

[justleft]

OOUUUCHHH !!!! :eek:

I must have timed it just right.

Oh yea, did I mention my attack dog sleeps in the boat

[fogducker III]

OOUUUCHHH !!!! :eek:

I must have timed it just right.

Oh yea, did I mention my attack dog sleeps in the boat

North Carolina would cost me more in fuel just to get there and scope out your set-up.............I asked the wife to sleep in the boat after I put in the new gauges..........didn't go down well...........:eek::eek::eek::wink: