Cig35Mistress
01-21-2009, 05:27 PM
One pair of Mark IV Chevy big block stroker long blocks. Began life as 4-bolt main 454/400 Cyclones. Bored .060" over and stroked .250" to make 496 cubic inches. Scat 4340 forged stroker cranks and H-beam connecting rods, JE/SRP forged pistons small dome pistons making 10:1 compression, GM 990 large rectangular port heads have been pocket ported and larger Manley valves installed, Comp Cams Xtreme Marine camshaft kits with roller timing sets, Comp roller rockers, Milodon large offshore pans, Merlin Marine intakes, Clevite 77 bearings, Durabond cam bearings, Fel-Pro gasket sets, ARP bolt sets, only the best of the best was used in these.
0 hours, never fired. Asking $8750 per motor or $15,000 for the pair. Located in South Florida.
E-mail me for pics and build sheets at HSL1048@gmail.com if you're interested.
Thanks,
Harry
0 hours, never fired. Asking $8750 per motor or $15,000 for the pair. Located in South Florida.
E-mail me for pics and build sheets at HSL1048@gmail.com if you're interested.
Thanks,
Harry