29 z deck removal

[piazzafatb]

Hi guys, I see some pics of 18' deck removal but I want to know If someone has some pics of a 29.

[undertaker]

Paging Trueser:)..........:):):)

[Trueser]

Never had to take ours off, I would say that it weighs over 1000 lbs.

[undertaker]

Never had to take ours off, I would say that it weighs over 1000 lbs.


I knew you did a TON of work on yours was not sure if ya removed the deck or not.....:)

[piazzafatb]

Trueser, any idea or recomendation how to do it?

[Trueser]

1. Remove the rub rail
2. Remove all the deck screws.
3. remove the interior /cabin
4. Remove the front and rear lifting ring.
5. The cockpit floor will have some fiberglass straps that will need to be cut.
6. Disconnect all the wires/cables/fuel line /water line/vents
7. You will need a crane to lift it off.

Are you sure you need to pull this apart. Send me an email and I will give you my number.

Mike

[piazzafatb]

1. Remove the rub rail
2. Remove all the deck screws.
3. remove the interior /cabin
4. Remove the front and rear lifting ring.
5. The cockpit floor will have some fiberglass straps that will need to be cut.
6. Disconnect all the wires/cables/fuel line /water line/vents
7. You will need a crane to lift it off.

Are you sure you need to pull this apart. Send me an email and I will give you my number.

Mike


Trueser, I send you two email? Receive it ?

[Trueser]

My work number 630.769.4283

[Madcow]

Buddy of mine lifted the deck off a 38 Scarab once. Same concept, just bigger. One thing to keep in mind is you will need a lot of overhead clearance, and don't forget to support the whole deck.