PDA

View Full Version : Chrysler exhaust



f_inscreenname
11-13-2008, 10:11 PM
Something for a small block Chrysler.
Thanks
Mark

LKSD
11-14-2008, 07:55 AM
Can you be more specific?.. Like year? ALso are you looking for inboard or IO applications. Log or std manifolds or Headers?? I have been pretty good with the Chrysler marine stuff... :) Jamie / Lakeside

f_inscreenname
11-15-2008, 11:00 AM
Hey Jamie
Looking for something that wont break the bank. I have no exhaust for it at the moment except for a couple elbows. It’s a I/O. Chrysler small block (360ci). Mid 80’s with a Volvo drive.
I rescued a boat (1973 Monza 19’) and I’m trying to rebuild it out of the garage with the left over’s from the Nova build. I have about everything except for a Volvo “T” transom shield and exhaust. So what ever you have I’m more then willing entertain the idea.
PS Not that I’m building a super boat but the motor is no slouch either so a good exhaust would be a benefit. I wish I knew a welder that could put a Chrysler exhaust flange on a small block Chevy manifold. They are so close in bolt patterns it wouldn’t take much skill but more then I have.
Motor = http://www.supernova19.com/forumcw/index.php?topic=738.0 (http://www.supernova19.com/forumcw/index.php?topic=738.0)
Boat = http://www.supernova19.com/forumcw/index.php?topic=759.0 (http://www.supernova19.com/forumcw/index.php?topic=759.0)

LKSD
11-16-2008, 09:45 PM
Hey Jamie
Looking for something that wont break the bank. I have no exhaust for it at the moment except for a couple elbows. It’s a I/O. Chrysler small block (360ci). Mid 80’s with a Volvo drive.
I rescued a boat (1973 Monza 19’) and I’m trying to rebuild it out of the garage with the left over’s from the Nova build. I have about everything except for a Volvo “T” transom shield and exhaust. So what ever you have I’m more then willing entertain the idea.
PS Not that I’m building a super boat but the motor is no slouch either so a good exhaust would be a benefit. I wish I knew a welder that could put a Chrysler exhaust flange on a small block Chevy manifold. They are so close in bolt patterns it wouldn’t take much skill but more then I have.
Motor = http://www.supernova19.com/forumcw/index.php?topic=738.0 (http://www.supernova19.com/forumcw/index.php?topic=738.0)
Boat = http://www.supernova19.com/forumcw/index.php?topic=759.0 (http://www.supernova19.com/forumcw/index.php?topic=759.0)

I will take a look at what I can maybe come up with for you on monday.. :) Jamie

LKSD
11-17-2008, 06:48 PM
I looked & I can get new oe/oe style manifolds, risers, elbows & components. I have a few different companies to choose from. If you still need them give me a shout tomorrow.. ;) Jamie / Lakeside 570-639-2628

f_inscreenname
11-17-2008, 10:12 PM
Hey Jamie
I have all of these so far.
http://img186.imageshack.us/img186/2075/64246835xx8.jpg

The Elbows are fine but the manifolds have ice damage. What can you do for manifolds and shipping to Maryland?

LKSD
11-17-2008, 11:13 PM
Pm me your contact # & I will call you on tuesday to discuss :) Jamie