View Full Version : super speed master for volvo
dunriteracing
11-06-2008, 02:44 PM
i have a nice supper speed master for volvo
i also have the drive parts also boat had a h/m ford lots of parts drive 2500.00 plus shipping for lower only or make a offer i can send pics has prop included
bronze 12/22 prop included in price
Dave 951 906 3034 i also have other parts call for info i am in so calif
ACrooks69
11-11-2008, 09:39 PM
Any pictures?
Danny
11-12-2008, 10:57 AM
Are we talking about e-drives. The whole drive or just the lower unit?
Do you know what ratio the drive is?
Diameter and pitch of the props?
Transom plate, hydraulic trim & tilt or the electric tilt.
Thanks Danny
staarrl
01-18-2009, 09:07 PM
Any chance that you still have it?
Thanks, Bob
66 18 2+3 Barrelback fully restored, 351w stroked
vrod02
01-29-2009, 07:23 PM
Are we talking about e-drives. The whole drive or just the lower unit?
Do you know what ratio the drive is?
Diameter and pitch of the props?
Transom plate, hydraulic trim & tilt or the electric tilt.
Thanks Danny
That is an e-drive listed. 151 to 1 is the ratio. Only ratio made or at least I know about.
Danny
02-16-2009, 03:02 PM
Mine are 1.41:1, there were 4 or 5 different ratios , the parts catalog pages I have shows, 1.45:1 1.41:1 1.26:1 1.18:1. There may have been more as you said 1.51:1 . There were 4 different series of what I call an e drive.170R, 250E, 270E and the 280E. I think they all used the same lower unit housing, different ratios and different uppers.
Conquistador_del_mar
02-17-2009, 01:29 AM
Mine are 1.41:1, there were 4 or 5 different ratios , the parts catalog pages I have shows, 1.45:1 1.41:1 1.26:1 1.18:1. There may have been more as you said 1.51:1 . There were 4 different series of what I call an e drive.170R, 250E, 270E and the 280E. I think they all used the same lower unit housing, different ratios and different uppers.
Of the e drives that I have, there are also two different prop shafts. Apparently one of them has a shaft for old Merc TRS speedmaster II props. Bill
Danny
02-17-2009, 06:36 PM
According to my prop guy mine is a mercury racing prop shaft, the spline count is 15. Came with 12x26 mercury props.
Danny
mstessing
03-16-2009, 06:37 AM
please see the attached URL for speedmaster that was used on 1972 Donzi -x 18'
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130293580520&ssPageName=ADME:L:LCA:MOTORS:1123
Rare find...
Mitch
mstessing
03-16-2009, 06:49 AM
here is picture
halvecta
10-13-2009, 11:58 PM
here is picture
Is this still available?
onkel egon
10-14-2009, 03:17 AM
No, I bought it.
But the gears lost some teeth and Im trying to get it fixed in the moment.
Frank
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.