Quicksilver control parts?

[fogducker III]

Well I was dicking with the Quicksilver Series 3000 side mounted control box on the 18 today, the arm was very loose and sloppy so i read up on how to take the neutral shift button out to get to the nut inside the arm to snug it up, well i broke the friggin plastic neutral button!!:mad:

Question, is there a replacement one available? and if so, does anybody have a part number i can ask for? I have done a long search through Google etc and can not come up with a part number...? Thanks for any help.

(Mental note to self, leave well enough alone...............)

[gero1]

yes there is a co that still has them but i can't remember the web site, i broke mine to. farmer tx gave me the site to get mine...maybe i will remember by morning.

[gero1]

824026 is the merc part number for mine, i think that there were a couple different styles of 3000 shifters. still cant remember the da^% web site

[gero1]

part was only 98c

[mikev]

Cool I have been needing one for years but never could find the part number. the button lives in my cup holder next to the throttle I push it in there when I need to start it

[mrfixxall]

Merc had a recall on some of those shifters,you may want to check with them first before you spend any money on that one..ger the serial # and call them.you may have a freebe coming..

[fogducker III]

Merc had a recall on some of those shifters,you may want to check with them first before you spend any money on that one..ger the serial # and call them.you may have a freebe coming..

This is a mid to late 1990's unit, would a recall go back that far? I will pull the unit and definatly get the serial number, thanks. I did find the part at the local dealer, who believe it or not, had it in stock!!! $4.........

[gero1]

doug russell marine!!!!!!!!!! had to call fr tex