Bravo 1 Trim Help

[Trueser]

I need to set up my mechanical indicators properly. Is the travel on the cylinders 6 1/2 +/- 1/4 before TRAILER mode sound correct?

http://www.mercstuff.com/trim_limit.htm

21.75" is the "max" extension on a Bravo drive.. is this correct?

Spacer installed close to the transom? correct?

[mrfixxall]

trues,if you have mechanical indicators you should have the hp housings and that txt your looking at has nothing to do with what your trying to adjust..

I dont know what type you have but i usually run the drives all the way in and and adjust them at 0 or 10, how ever your guage reads:)

[BaldEagle]

Mike thats how mine are set too. 10 is all in and 0 ends up being above where you can run but not in trailer mode. to get to trailer mode I hold the switch in until I hear the pump kick down.