View Full Version : Has anyone ever used "diesel" exhaust clamps?
Lenny
07-12-2008, 09:06 PM
Not neccessarily these, but you get the idea. Extra bling.
Will they work?
http://www.amazon.com/dp/B000CQFPX4?smid=ATVPDKIKX0DER&tag=nextag-auto-20&linkCode=asn
BUIZILLA
07-12-2008, 09:19 PM
they connect metal together, not rubber
Lenny
07-12-2008, 10:00 PM
Thanks Buzz :)
BigGrizzly
07-13-2008, 08:30 AM
The work great on car exhausts and suck on boats unless the hose is inside of the clamp then they still leak eith hard side exhaust hose. Regular clamps are better on hose.
BUIZILLA
07-13-2008, 09:11 AM
the ABA's use a 7mm hex drive...
mrfixxall
07-13-2008, 10:36 AM
Not neccessarily these, but you get the idea. Extra bling.
Will they work?
http://www.amazon.com/dp/B000CQFPX4?smid=ATVPDKIKX0DER&tag=nextag-auto-20&linkCode=asn
Thease are the only clamps i use..http://www.clampco.com/products/t-bolt-marine.asp
BigGrizzly
07-13-2008, 10:41 AM
I don't use them on anything except water pumps but T bolt clamps are awesome
mrfixxall
07-13-2008, 10:53 AM
I don't use them on anything except water pumps but T bolt clamps are awesome
i have them on everything! they dont come loose or brake like the worm gear style:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.