Non corrosive bushings

[MOP]

I need 3 5/16"ID X 1/2"OD bushings 1/4"-3/8" long! used a spacer bushings preferably stainless or hard plastic.

Phil

[penbroke]

Go to McMaster Carr (http://www.mcmaster.com/) and search "bushing". I the way their search works I can't link to it directly. I think my local hardware store has some stuff like that as well.


Frank

[MOP]

Hi Frank I hit 3 HD stores trying to find them, Mike Maddad found them locally by him but none out by me. They are for the Johnson pump I put on last week. It has a slight wobble .011 on my dial, I am not happy with something vibrating on the tip of my Lunati crank. you can tell by the busing by size how loose a fit the bolts are. I tied getting away with wrapping the bolts with Teflon tape until the fit the bores quite tight but still ended up with it being off. I'll try the link thanks!!!

Phil

[penbroke]

If ya can't find what ya need I think I have some 1/2" delrin rod at the shop...


Frank