PDA

View Full Version : Complete SB sea water pump setup



MOP
06-24-2008, 05:16 PM
I am selling a near new "Bronze" sea water pump, it has just over 100 hours on it. It has a brand new impeller and all hardware and brackets, bolt it on hook up your hoses and go. Bore and back plate show no wear, it has alway had a sea strainer ahead of it. Near $700 new $300 + Ship. Check the pics out there is -0- scoring and no sign of wear, the new impeller was the first change out.
I swapped to a crank pump, what a job never do that again. Good opportunity for someone to get rid of the Merc plastic junk pump along with the cheap tin mount.

MOP
08-23-2008, 08:22 PM
BUMP!! I am surprised that the guys that are running the Merc plastic krap pumps have not jumped on this! The pump its self is for a BB the brackets are for a SB but I have a hunch it would take very little to adapt. This would be the last pump you would buy!!! Solid bronze with the brand new impeller completely assembled ready to Bolt & Go. The plate and housing only show of patina with no signs of wear.