PDA

View Full Version : thru hull help


zedohsix
06-23-2008, 09:57 AM
I'm installing thru hull on my 16, can anyone tell me what I should use to block off the existing lower pipes
:canada:
BlownCrewCab
06-23-2008, 10:16 AM
A little more detail is needed...What Kind of motor/Drive do you have? Most will require you to remove the Y Pipe and put a block-Off plate down at the Inner Drive. I Haven't seen it done leaving the Y pipe.
zedohsix
06-23-2008, 12:35 PM
should have mentioned merc 350 with merc outdrive
MOP
06-23-2008, 03:15 PM
Leaving the Y is probably a good idea, never can tell when you may want to install Q&Q to cut the noise. What I and several others have done is to use plumbers caps on the Y pipes ends they work great.

Phil
BlownCrewCab
06-23-2008, 03:45 PM
Leaving the Y is probably a good idea, never can tell when you may want to install Q&Q to cut the noise. What I and several others have done is to use plumbers caps on the Y pipes ends they work great.

Phil


There You Go, that seems easier.