PDA

View Full Version : Waukasha powered DONZI



olredalert
05-04-2008, 10:58 PM
------I have a friend down in Ohio (yup I do have one) that has a 1974 El Pescador with a Volvo/Waukasha (351 Ford) drivetrain. He needs a bellhousing if I read his E-mail correctly. I dont know what bellhousing would crossreference with a Waukasha (Ford) if there even is one. Anybody have a clue???.........Bill S

MOP
05-05-2008, 08:14 AM
------I have a friend down in Ohio (yup I do have one) that has a 1974 El Pescador with a Volvo/Waukasha (351 Ford) drivetrain. He needs a bellhousing if I read his E-mail correctly. I dont know what bellhousing would crossreference with a Waukasha (Ford) if there even is one. Anybody have a clue???.........Bill S

One of our members Art from Babylon had one and parted it out, he may still have the bell housing. All the parts were super mint from fresh water, Broque bought the trim and tilt I bought the 4 barrel manifold. The whole package only had 216 hours on it.

I just left Art a message to see if he still has the housing!

Phil

MOP
05-05-2008, 08:16 AM
I have a hunch the bell housing is a standard piece, either the long or short one!

BillG
05-05-2008, 11:59 AM
Try www.skidim.com

Bill

BigGrizzly
05-05-2008, 05:41 PM
OSCO sp use to have them as of a couple of years ago.

olredalert
05-05-2008, 08:56 PM
-------Much thanks, guys,,,That should either give him a good start or, with luck, a good finish..........Bill S

MOP
05-06-2008, 12:44 PM
Sorry but Art sold the setup he had.

Phil