PDA

View Full Version : Scorpion ???



Trueser
04-21-2008, 10:36 PM
Is the stock 25 Mirage plus the best for a 28zx?

Does anyone have the part number for a K&N Air filter?

Why do the trim pumps leak from the cap?

synack
04-22-2008, 01:58 AM
1) I was told yes it is. This was tested by Donzi at great length.

2) Probably doesn't need it.

3) ???

Mr X
04-22-2008, 04:32 AM
1. No, 25 Mirage Plus LAB


2. Won't go any faster but look cool.



3. Buy these and it wont. http://www.danamarineproducts.com/GroupCatProducts.cfm?CatId=245&group_id=38&page=1&CFID=401341&CFTOKEN=15018565

Trueser
04-22-2008, 07:03 AM
1. No, 25 Mirage Plus LAB

They are lab,

2. Won't go any faster but look cool.

3. Buy these and it wont. http://www.danamarineproducts.com/GroupCatProducts.cfm?CatId=245&group_id=38&page=1&CFID=401341&CFTOKEN=15018565 Ordered..

Thanks for your help

roadtrip se
04-22-2008, 10:33 AM
1. No, 25 Mirage Plus LAB


I know Merc Lab, but what exactly did they do other than a little thining?

VetteLT193
04-22-2008, 11:23 AM
I know Merc Lab, but what exactly did they do other than a little thining?

I don't think the speed so much comes from the thinning as it does the extreme tolerances the prop is checked out to. A labbed prop is as perfect as can be, so the increase in balance and perfection from blade to blade means you get better performance.

I've always wanted a labbed prop but it's hard to justify for a pleasure boat. I've only run 1 boat (only counting boats that I put a bunch of hours on) that I didn't screw the prop(s) up to some extent. It's hard to keep props perfect when you use the boat a lot and explore new areas... even the slightest run-in with anything will blow any benefit from labbing away.