Stainless Steel Donzi Logos

[Ranman]

I am selling a set of SS Donzi logos I had custom made a while back. The complete logo measures 3" High x 27" Wide and was intended to be a modern replacement for the 80's style foil logos found on the 18's. The letters were water jet cut from high quality .078" #8 mirror polished grade 316SS. I don't know if these match the size of the SS Shelby logos since these were cut before the Shelbys came out, but they have to be darn close. I am linking the original thread from when I had these done. The edges have been deburred, but are unfinished. A small dremel could easily polish the edges to perfection.
I have seen other SS logos offered, but please keep in mind that I used the best material I could find. Full .078 thickness, 316SS (not thin material, not 304 or any other inferior grade of SS). Price out the stock, factor in the design and cut time and you'll know these are not inexpensive to make.
Check this link.
http://www.donzi.net/forums/showpost.php?p=276207&postcount=8
$100.00 per 5 letter word "DONZI"
Please PM me if you are interested. Thanks.
http://www.donzi.net/forums/attachment.php?attachmentid=2191&d=1082511898

[Ranman]

Price lowered to $100/each word

[Donzi Racer]

Price lowered to $100/each word


Ranman, Do you still have a set of the smaller letters? Give me a deal on a set of 2 words on the smaller letters and 2 words on the larger letters if you have. Thanks, Tom 256-777-0844

[hot shot]

Ranman: Whats up ? Hoped to see you at madcow this year.... Whats up do you have anymore ss Donzi letters ?

[Shawgo]

Still available? I am interested.

Just let me know.

RS