jamieZ
11-12-2007, 08:21 AM
I have a bit of water getting in and running out of the right side of the flat walkway drain right underneath the plastic inspection cover in the engine compartment. The only place I can figure water is getting in is where the top/bottom of the boat are joined behind the metal piece that runs around the boat at the rear. Right now there appears to be a fexible caulking in there.Should I get that out and glass it for a real tight seal? Second question. I'm having a new sunpad make. The old one was in five pieces, 3 pads and 2 narrow pieces.The water has gotten between these pieces and rotted the wood and vinyl. The new piece will all be one with no seams. This makes more sense to me and would probably be more comfortable to sit on.Can anybody see a down side to this? One more thing, the mirror panels on the inside of the engine cover are starting to peel a mittle bit. Where would I find a sheet of that stuff? OK, three questions. Thanks for your input. Jamie