PDA

View Full Version : Small Block Chevy Edelbrock Intake Manifold



DonCig
11-07-2007, 09:37 PM
The ultimate in street high performance.
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane layout, with a 180 degree firing order. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high-performance street or competition engines that run from 1,500 to 6,500 rpm.

http://store.summitracing.com/partdetail.asp?part=EDL%2D7101&autoview=sku

I have used this for one season in fresh water only.

In excellent shape and priced to sell.

$75.00 and I pay the shipping.


Don

MOP
11-08-2007, 06:38 AM
Don I run that same manifold on the 383, it is a real good manifold and you deal is even better.

Phil

cutwater
11-08-2007, 09:18 AM
Hey Don -

I am really interested in the intake. I have an '88 SBC Merc 4bolt main (but with OMC accessories - go figure!). This intake should fit, right? I don't have Vortec heads, but if I'm correct this isn't either.
John

DonCig
11-11-2007, 02:38 PM
Hey Don -

I am really interested in the intake. I have an '88 SBC Merc 4bolt main (but with OMC accessories - go figure!). This intake should fit, right? I don't have Vortec heads, but if I'm correct this isn't either.
John

John, I need for you to pm me if you are really interested; if I do not hear from you they are going on ebay.

Don

wagspe208
12-10-2007, 10:54 PM
sent pm if still available
Wags

margo
01-27-2008, 06:15 PM
Would this man. work on a a stock 350 engine with no mods... thanks Joe
http://store.summitracing.com/partdetail.asp?part=EDL%2D7101&autoview=sku

I have used this for one season in fresh water only.

In excellent shape and priced to sell.

$75.00 and I pay the shipping.


Don[/quote]

BlownCrewCab
01-28-2008, 07:39 AM
Would this man. work on a a stock 350 engine with no mods... thanks Joe
http://store.summitracing.com/partdetail.asp?part=EDL%2D7101&autoview=sku

I have used this for one season in fresh water only.

In excellent shape and priced to sell.

$75.00 and I pay the shipping.


Don[/quote]


Yes, That would work fine with no other mods. also It will enhance future mods you do....