justleft
10-24-2007, 12:29 PM
I am replumbing and upgrading the fuel system in the 454 gen 6 22c.
A previous owner had used hydrolic lines as fuel hoses. The lines are 1/2 inch
but the fittings have about 1/8" opennings. Over the years the gas has
leaked into the casing. What a stink !!!
Should I put the filter/seperator before the electric holley marine pump or after ?
The carb plumbing has a screen style filter built in.
I have seen them both ways.
A previous owner had used hydrolic lines as fuel hoses. The lines are 1/2 inch
but the fittings have about 1/8" opennings. Over the years the gas has
leaked into the casing. What a stink !!!
Should I put the filter/seperator before the electric holley marine pump or after ?
The carb plumbing has a screen style filter built in.
I have seen them both ways.