PDA

View Full Version : 460 (7.5) Exhaust Manifolds



tgoff
10-06-2007, 10:55 PM
I am in serious need of an exhaust manifold for an 1989 omc king cobra exhaust manifold that fits a 460 (7.5).

If anyone has any for sale or can point me in the right direction to buy them I would be very appreciative.

Its my B-day today so give me some good news...I need it!!!

Thanks,
Travis Goff
gofftravis@gmail.com
757 620 2194

MOP
10-07-2007, 07:54 AM
The stock iron is pretty hard to find! There is a possible alternative, there is an adapter plate setup made to use BBC on BBF's. Poodle or one of the other fellows more up on parts should be able to help.

Phil

MOP
10-07-2007, 08:02 AM
These are the plates mentioned above! They say for use only with cast aluminum, they may not carry the weight of cast iron but should be fine with most headers systems.

http://www.cpperformance.com/products/Exhaust/manifold-spacers.htm

98shovel
10-07-2007, 10:09 PM
have a set will sell came off a testarossa in excellent condition their complete with risers
call me 253.376.0133
patrick

mrfixxall
10-12-2007, 10:34 PM
heres onr the nightmares i created :)

showtime
10-19-2007, 08:31 PM
Some showed up on ebay today item #300152769607

Lenny
10-19-2007, 08:46 PM
Here you go... :)

http://cgi.ebay.com/ebaymotors/460-OMC-King-Cobra-Exhaust-Manifolds-Risers_W0QQcmdZViewItemQQcategoryZ31285QQihZ020QQi temZ300162769607QQrdZ1QQsspagenameZWDVW

Being Arizona you have yourself fresh water units if local.

mrfixxall
10-19-2007, 08:47 PM
Some showed up on ebay today item #300152769607


showtime,,i think one of the numbers are off..here what the numbers link to.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&viewitem=&ru=http%3A%2F%2Fsearch.ebay.com%3A80%2Fws%2Fsearch %2FSaleSearch%3Fsofocus%3Dbs%26satitle%3D300152769 607%26sacat%3D-1%2526catref%253DC5%26_trksid%3Dm37%26from%3DR7%26 nojspr%3Dy%26pfid%3D0%26fsop%3D1%2526fsoo%253D1%26 fcl%3D3%26frpp%3D50%26fvi%3D1&item=300152769607