PDA

View Full Version : Paging Catch 22


Mr X
10-01-2007, 08:51 AM
Jim,
can you email me your phone number?

Thanks,
Ted
Mr X
10-06-2007, 09:36 PM
Bump.
Cuda
10-06-2007, 10:28 PM
Ted, check your email.
catch 22
10-07-2007, 06:27 AM
MR. X, I'm assuming my cute little secretary handled that for me.:yes::biggrin::biggrin:
catch 22
10-07-2007, 08:07 AM
Ted. Sorry we got cut off. Let me know how it turns out. Nice talking to you. Thanks for your advice and help. Jim
Mr X
10-07-2007, 09:05 AM
Thanks Jim!!
I will let ya know how it turns out.
roadtrip se
10-07-2007, 10:25 AM
what turns out?

Mr. X is over due for a little update on the "project".

C'mon man, give us at least a scrap...

Keeper of the high performance flame, admirer of those who wish to go boldly where no man should ever go, and contemplater of the proposed winter "freshening"....
Mr X
10-07-2007, 11:04 AM
Or two...... :wink:

A bigger scrap comming very soon!
BUIZILLA
10-07-2007, 11:24 AM
the race to space............................. :shocking: :eek:

:pimp: :yes: :shades:
Lenny
10-07-2007, 02:43 PM
Nice Ted, I can see where this is going... :rolleyes:

"...just when you think you are out...they suck you back in..."

Ted, I am going to have a hard time keeping up to you, let alone "passing" .

Keep up the awe inspiring work. :)

Lenny
Cuda
10-07-2007, 07:03 PM
MR. X, I'm assuming my cute little secretary handled that for me.:yes::biggrin::biggrin:
I got your secretary hanging! :eek!::bonk::biggrin:
TXDONZI
10-07-2007, 10:15 PM
Where do you get seats like those or the ones in the Shelby Edition 22? I want a white set for my 22.
Mr X
10-08-2007, 08:13 AM
You will have to go thru your Donzi dealer.
Something to consider, is that the Shelby seats mount completely differently.
You would have to make several modifactions.
p729lws
10-08-2007, 10:12 AM
Or two...... :wink:
A bigger scrap comming very soon!


How big of a scrap? 550, 625 or 700?

Dan
RickyR
10-08-2007, 07:31 PM
Or two...... :wink:
A bigger scrap comming very soon!

I'll validate this.. I saw the big piece of scrap sitting on the floor at the plant.
They almost swept it out, but I think it was salvaged just in time...
Mr X
10-08-2007, 07:34 PM
Ricky,
don't let the cat out of the bag just yet! :wink:
More photos comming soon!
RickyR
10-08-2007, 07:41 PM
Ricky,
don't let the cat out of the bag just yet! :wink:
More photos comming soon!

Ted, don't worry your secret is safe with me...v:crossfing: :cool!:
Mr X
10-08-2007, 07:44 PM
Ricky, I got your email.......I am working on it :)
RickSE
10-09-2007, 10:56 AM
Ted,
Make sure you use the correct length mounting screws in the base of those seats so they don't poke you in the A$$ like the seats in the Aronow's and Shelby's did. :eek!:
Mr X
10-09-2007, 01:29 PM
Rick, these seat bases actually have metal threaded inserts in them for bolts.
RickSE
10-09-2007, 02:31 PM
Ted, take your hand and push down on the upholstery in the front corners of the seat, front part of the blue center insert. You should be able to feel the thread insert and the bolt that goes through the insert. If the bolt going through the insert is too long there is the potential risk that the bolts will poke through the upholstery. Blueliner stepped on his seat with his foot, hitting the insert and fastener, and actually poked a hole through his upholstery; Donzi had to send him new seats. We checked the brandywine Shelby at the 07' show and you could feel the end of the bolt and insert through the upholstery pretty easily. This is just a heads-up. You should be fine as long as the fastener does not extend significantly far through the thread insert, which was the original problem.