28DONZI
09-06-2007, 05:55 PM
We have an older Donzi and I'm trying to gather information on the hull and original specs. Here's what we know:
28' long fiberglass hull, has small galley w/alcohol stove, small sink and ice box all on port side. Starboard there is a small stand up head. Forward of all that is a table with pedestal, converts to v berth. Pretty good sized cabin for a 28'. Twin engines, gas 260HP Volvo Penta. Not original equipment. The engine face aft with a vee drive forward. Just ahead of the drives are 2 fiberglasses, plywood framed gas tanks. Has twin bronze knife like rudders contolled by tie rod connected to cable assembly. Hull has a typical deep vee and nice lines. It has a large stainless tower above the steering station. not sure if original or not. Never had the original props. We're trying to ID the boat for specs like actual hull weight. We believe it's a 1967-68 hull. No markings we have found yet. Any suggestions or input? please advise! thanks
28' long fiberglass hull, has small galley w/alcohol stove, small sink and ice box all on port side. Starboard there is a small stand up head. Forward of all that is a table with pedestal, converts to v berth. Pretty good sized cabin for a 28'. Twin engines, gas 260HP Volvo Penta. Not original equipment. The engine face aft with a vee drive forward. Just ahead of the drives are 2 fiberglasses, plywood framed gas tanks. Has twin bronze knife like rudders contolled by tie rod connected to cable assembly. Hull has a typical deep vee and nice lines. It has a large stainless tower above the steering station. not sure if original or not. Never had the original props. We're trying to ID the boat for specs like actual hull weight. We believe it's a 1967-68 hull. No markings we have found yet. Any suggestions or input? please advise! thanks