zimm17
08-30-2007, 05:23 PM
I'm selling my almost new Livorsi throttle. It's Candy apple red. Only used for a few weeks (5 trips). Works fine on most engine setups, but not enough friction to hold the abnormally strong throttle spring on my whipple supercharger.
Fully "universal" works with all setups. I've also included the K35 connectors to use mercruiser cables.
A new Livorsi sticker is included- although the old one was plenty of "stick" left to it. you have to peal it off to get to the screw holding the handle on.
It has the trim button in the handle, works just like stock.
You can see the white shrink wrap on the wires is a bit abraded- that will happen just pulling the wires through the unit because of the way the handle has to be installed. The wire insulation is perfect and it will work just fine.
If you have the old style 80's quicksilver shifter, you'll have to cut the hole a bit bigger. Use the base as a template and roto-zip away.
I'll take the best offer over $300- PM or email me.
Greg
Fully "universal" works with all setups. I've also included the K35 connectors to use mercruiser cables.
A new Livorsi sticker is included- although the old one was plenty of "stick" left to it. you have to peal it off to get to the screw holding the handle on.
It has the trim button in the handle, works just like stock.
You can see the white shrink wrap on the wires is a bit abraded- that will happen just pulling the wires through the unit because of the way the handle has to be installed. The wire insulation is perfect and it will work just fine.
If you have the old style 80's quicksilver shifter, you'll have to cut the hole a bit bigger. Use the base as a template and roto-zip away.
I'll take the best offer over $300- PM or email me.
Greg