PDA

View Full Version : Exhaust Manifold torque



Donziweasel
08-09-2007, 09:21 AM
Got the exhaust on, what a back breaker. What should I torque the bolts to?

Donziweasel
08-09-2007, 09:29 AM
Also wondering if I should lean my carb out since I should have better vaccum provided thier are no leaks or leave it stock for first round of testing?

mrfixxall
08-09-2007, 09:44 AM
Got the exhaust on, what a back breaker. What should I torque the bolts to?

30 to 35 ftlbs

Donziweasel
08-09-2007, 09:47 AM
Riser bolt torque?

BUIZILLA
08-09-2007, 10:25 AM
fug snit

mrfixxall
08-09-2007, 10:30 AM
Riser bolt torque?

30 ftlbs,,make sure their flat and straight, i usually get them to bare metal or alunimum and use a sand stone on them to get them flat....even tho their grafoil gasgets still use your non hardening sealer on both sides..

RickR
08-09-2007, 11:05 AM
Retorque after a few heat cycles. Hi Temp antisieze on the manifold bolts.
I use "Hylomar" for a "non hardening sealer"

Cuda
08-09-2007, 05:02 PM
fug snit
Using the old "calibrated elbow" as my dad says. :)