View Full Version : Stringer height at motor mts
ghiafreak62
06-28-2007, 03:03 PM
on a 93 c22 can anyone tell me the height from the bottom to the top of the stringers where the motor mount plate sits, I think it is 7" but I don't know if thats inside or outside the stringers thanks.
You have a standard 22" on center stringer setup, mine is 67" inside any higher it is a pain doing the mount pad bolts.
Phil
ghiafreak62
06-28-2007, 07:10 PM
You have a standard 22" on center stringer setup, mine is 67" inside any higher it is a pain doing the mount pad bolts.
Phil
MOP, my stringers our only 9" tall.
MOP, my stringers our only 9" tall.
I should proof read!!!!! 7" inside!!!! Watching TV and typing does that to you!
Phil
ghiafreak62
06-28-2007, 07:28 PM
I should proof read!!!!! 7" inside!!!! Watching TV and typing does that to you!
Phil
let me make sure that understand, 7" high inside toward the center of the boat. thanks
let me make sure that understand, 7" high inside toward the center of the boat. thanks
Yup! I also have one of the higher X stock dimensions of 17", I have the stock style motor mounts. I hope that helps with your thoughts.
Phil
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.