PDA

View Full Version : Looking for some good advice.



DonCig
06-28-2007, 07:42 AM
I would like to add a pair of high quality stainless weenie bars to my Classic 18. I want the single rails on the sides, not the full front wrap around.
From what I have seen Donzi installs these before the top goes on the hull, so I have not found the appropriate hardware to top mount these. Has anyone done this project and can you reccomend the best hardware availabile for doing this project?

Thanks,

Don

mrfixxall
06-28-2007, 10:24 AM
i got all the stuff from D.I.Y. marine..200 bucks

penbroke
06-28-2007, 11:13 AM
It IS possible to reach the underside of both ends with the stock parts/location (or at least it is on mine). The center can be done with a bit of cleverness with a wrench on a yard stick or a small child. I think rustnrot has a source for hardware that looks like the original.

Frank

mrfixxall
06-28-2007, 12:05 PM
the oe ones on my x were cromed pot metal,i upgraded to ss.the ones i chose had studs on the bottom of them which the stock ones had..was hard to find them,others are through bolted..