View Full Version : 350 efi k&n flame arrestor
Moosey
05-14-2007, 06:54 PM
I want to add a K&N to my 350 multi port EFI but can find no source for the "adaptor" to attach the filter. There seem to be sources for the "adaptor" for the 502 etc, but I am unable, so far, to source one for the 350.
Anybody have the answer for me? Appreciate any help you can give me!
Moosey
Try using the search feature there may be some info!
You will have to get a custom clamp on one. As the monting flange is narrow & there is nothing to screw it down to on these newer Mpi Mag 5.7's.. I think it is a 3 1/8" opening.. You will almost have to use something similar to the 496 K&K element.. ;) Jamie / Lakeside
.
Ranman
05-15-2007, 08:39 AM
Moosey,
What year is your 350MAG? If it's a '96 or '97 350 MAG MPI Gen+ I might be able to help. Let me know.
Moosey
05-15-2007, 07:15 PM
Great!!!!!!!!!!!!
I have a '96 Donzi Classic with a similar "(96) multiport injected EFI merc etc.
HELP.
Moosey
Moosey
05-17-2007, 07:38 PM
Moosey,
What year is your 350MAG? If it's a '96 or '97 350 MAG MPI Gen+ I might be able to help. Let me know.
Hi Ranman,
Yes, it's a '96 350 mag.hope you have "the answer". Thanks!
Moosey
DonCig
05-17-2007, 07:44 PM
This photo and thread of mine may help you.
http://www.donzi.net/forums/showthread.php?t=25439&highlight=K%26N
Don
Ranman
05-20-2007, 09:48 PM
Moosey,
Don has steered you in the right direction.
THe 96 and 97 350 MAG MPI Gen+ has the exact same throttle body as the 454 and 502MAGs so this setup will bolt right up.
This is what you want to order. Let CP know you have a serpentine belt as there used to be two separate part numbers for the SS series arestor (one for v belts and one for serpentine). I don't see the serpentine flavor listed, but it may not make any difference.
http://www.cpperformance.com/detail.aspx?ID=857
Moosey
05-21-2007, 09:56 PM
Moosey,
Don has steered you in the right direction.
THe 96 and 97 350 MAG MPI Gen+ has the exact same throttle body as the 454 and 502MAGs so this setup will bolt right up.
This is what you want to order. Let CP know you have a serpentine belt as there used to be two separate part numbers for the SS series arestor (one for v belts and one for serpentine). I don't see the serpentine flavor listed, but it may not make any difference.
http://www.cpperformance.com/detail.aspx?ID=857
Wow, Thanks for the info!!!!!!!!!
Moosey
Moosey
05-21-2007, 09:58 PM
Thanks for the help.............this was impossible w/o you guys.
Thanks again,
Moosey
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.