PDA

View Full Version : scratch removal



glashole
05-07-2007, 08:11 AM
I have a couple of small scratches in the gel coat that have occured over the winter and with the motor changes etc..

what is the best method to remove these sanding? :confused:

you can feel a couple with your finger nail slightly

the worst thing is one is in a fairly noticable location (by engine hatch) :frown:


Shea

RedDog
05-07-2007, 08:27 AM
you should be able to wet sand them out. start with a 600 grit and end up with a 1500 or 2000 grit. Follow with 3M Finesse and then a polish

glashole
05-07-2007, 08:43 AM
can you do just a small area or how far should you try to blend?

RedDog
05-07-2007, 01:55 PM
if it is not deep, and based on your description yours are not, then it should take much blending