OMC Gaskets

[travisgoff]

Anyone know where I can find OMC king cobra gaskets? I need one that goes between the verticle drive and the gimble housing?

[Greg K]

Try Doug Russell (http://www.dougrussell.com/partscatalog/volvo_omc/index.cfm?fuseaction=group&type=omc&group=)

[travisgoff]

Never Mind, I think I got one. Sorry for the bad post.

-Travis

[MOP]

If you find you need a set West Marine has them, also make sure you coat both mating surfaces with non hardening gasket compound.

Phil

[joel3078]

I had all new seals, bellows, gaskets, etc. put in my king cobra last fall. My dealer was able to order king cobra parts right from BRP. Bombardier Recreational Products.

OMC Evinrude/Johnson was bought out by www.brp.com about 4 years ago. To find parts for OMC king cobra go to this link.

http://epc.brp.com/default.aspx?lang=E&brands=skidoo,seadoo,atv,sportboat,ej

Click on Stern Drive in the left hand pull down menu. Surf around and eventually you will find the drawings and part numbers for your stern drive. The website is not e commerce enabled. It simply will show drawings and part numbers.

www.sterndrive.info/index.html
I've ordered water impeller parts and other misc items with good luck from these guys.

www.sterndrive.com is another avenue for parts.
http://www.sterndrive.com/boneyard.cfm?cat=OMC