Teague HP6 remote oil filter mount

[fasttrucker]

Need to move oil filter on new motor set-up.Going to order one monday.In red of course,has anyone use one before?Filters 20gpm 20 microns!Teague claims the largest filter system available$149.97

[BUIZILLA]

20 micron only keeps the rocks and chunks out...

[fasttrucker]

20 micron only keeps the rocks and chunks out...
What do you use?

[DonCig]

I have a 1 year old Hardin Billet HP4 - HP6 filter head for sale for 125.00 which includes shipping. It worked great and retails for more than the Teague item.
Here is a link to the item. If you want, I can ship it Monday.

http://www.hardin-marine.com/detail~ID~83.aspx

I swapped out this one for a similiar thermostat controlled one from Hardin, a lot more expensive but my oil temps were running too high at Lake Powell so I went to a larger 3" oil cooler; so I felt that with 11 quarts of oil in the system and boating in both Cold Colorado and Hot Powell, putting an oil thermostat in place was probably a wise decision so that the engine could heat up fairly quickly.

Here is a link to the new unit I installed:

http://www.hardin-marine.com/detail~ID~205.aspx


Also, if you are interested I have the made-up high dollar Aeroquip Stainless Braided hoses already fabricated and ready for the instalation. They have been used 1 year and they are very nice and very pricey new; and definately overkill. Since I am not using them with the new filter mount I will sell them for 1/2 of new; so $175.000 and they are yours. I am using the Aeroquip Blue Push on hose for ease of instalation. Even the components out of this product ran $300 for a two hose set. Everything is -12 AN size. I have attached a picture of them for your viewing. I have also included a picture of where I mounted the filter head so you can decide if the hoses might fit your application.

http://www.hardin-marine.com/detail~ID~205.aspx

So for $300.00 your get about $600.00 of hardware tested and delivered to your door. PayPal address is dntamm@aol.com

If you have any questions that you might want to ask; shoot me a pm.

Good Luck, your project will be nice when it is done. Buzilla helped me a lot on my project, so I would tend to go with his advice on most items. I did a little research on the Fram HP$ and HP6 filters; but I am no expert on oil filtration. Fram was making two different HP6 filters when I installed mine. One filter for the NASCAR crowd and one filter for the Drag Race crowd.

Don

[fasttrucker]

test

[fasttrucker]

I have a 1 year old Hardin Billet HP4 - HP6 filter head for sale for 125.00 which includes shipping. It worked great and retails for more than the Teague item.
Here is a link to the item. If you want, I can ship it Monday.
http://www.hardin-marine.com/detail~ID~83.aspx
I swapped out this one for a similiar thermostat controlled one from Hardin, a lot more expensive but my oil temps were running too high at Lake Powell so I went to a larger 3" oil cooler; so I felt that with 11 quarts of oil in the system and boating in both Cold Colorado and Hot Powell, putting an oil thermostat in place was probably a wise decision so that the engine could heat up fairly quickly.
Here is a link to the new unit I installed:
http://www.hardin-marine.com/detail~ID~205.aspx
Also, if you are interested I have the made-up high dollar Aeroquip Stainless Braided hoses already fabricated and ready for the instalation. They have been used 1 year and they are very nice and very pricey new; and definately overkill. Since I am not using them with the new filter mount I will sell them for 1/2 of new; so $175.000 and they are yours. I am using the Aeroquip Blue Push on hose for ease of instalation. Even the components out of this product ran $300 for a two hose set. Everything is -12 AN size. I have attached a picture of them for your viewing. I have also included a picture of where I mounted the filter head so you can decide if the hoses might fit your application.
http://www.hardin-marine.com/detail~ID~205.aspx
So for $300.00 your get about $600.00 of hardware tested and delivered to your door. PayPal address is dntamm@aol.com
If you have any questions that you might want to ask; shoot me a pm.
Good Luck, your project will be nice when it is done. Buzilla helped me a lot on my project, so I would tend to go with his advice on most items. I did a little research on the Fram HP$ and HP6 filters; but I am no expert on oil filtration. Fram was making two different HP6 filters when I installed mine. One filter for the NASCAR crowd and one filter for the Drag Race crowd.
Don
O.K. Ill check with tony and see if he likes it.Thanks I will get back to you soon.