PDA

View Full Version : Swim Ladder Removal on 33zx



Johntrip
04-04-2007, 11:31 PM
Just removed my swim ladder and thought I would post the simple procedure for the registry. First I removed the nuts and washers holding the ladder from the open void in the back of the engine compartment. Next, I applied Anti-Bond 2015 to the 5200 epoxy holding the ladder to the gelcoat under the platform. After 10 minutes I applied a second coat of Anti-Bond and noticed the epoxy was softening up. I waited another 10 minutes and pulled the ladder and it released surprisingly easy. Used 1/2 of the 1.5oz bottle.

Wanna thank MOP for the past post on the Anti-Bond...

BUIZILLA
04-05-2007, 06:19 AM
are you installing a diving board instead?? :bonk: :lookaroun:

LKSD
04-06-2007, 07:58 AM
Yes, why are you removing the ladder?? :D Jamie

CHACHI
04-06-2007, 08:04 AM
I have used a product call Debond to remove exhaust tips.
Works the same way and very effective.
Ken

undertaker
04-08-2007, 09:02 AM
are you installing a diving board instead?? :bonk: :lookaroun:



:) :) :) :) :) :) :)