PDA

View Full Version : 1968 Classic 18 Parts



Larry Mauldin
04-02-2007, 12:40 PM
I need hand rail ends for a classic 18, 1968 if they vary with year.

LKSD
04-03-2007, 12:44 AM
I believe I can get you those. Call me if you are interested.. I have a few older & some newer Donzis in the shop currently including a 1968 & 1971 18' HM Donzi classic, so I compare my book to one of them if I need too.. ;) Jamie / Lakeside 570-639-2628


.

Rootsy
04-03-2007, 06:07 AM
The correct end rails are NLA new, commercially. You can get a similar style though which bolts through the top of the rail end and you will see the bolt head.

Rich Pflaumer (Rich on donzi.net) did have some correct new ones made but i don't know if he has anymore as he may have only had a pair or two last time i spoke to him.. try dropping him an email and see the attached thread.

http://www.donzi.net/forums/showthread.php?t=30401

Rootsy

Larry Mauldin
04-03-2007, 06:21 AM
Thanks for the info. I will try both directions.

LKSD
04-03-2007, 08:33 AM
The correct end rails are NLA new, commercially. You can get a similar style though which bolts through the top of the rail end and you will see the bolt head.

Rich Pflaumer (Rich on donzi.net) did have some correct new ones made but i don't know if he has anymore as he may have only had a pair or two last time i spoke to him.. try dropping him an email and see the attached thread.

http://www.donzi.net/forums/showthread.php?t=30401

Rootsy

You may be right. I know I can get the end rails that look the same, but I didn't check to see if they have the bolt head thru the top showing.. I also think the new ones that I can get may also come in polished Stainless steel.. :)

I am here if ya guys need me.. ;) Jamie / Lakeside

.