PDA

View Full Version : changing Bezels?



Schaf
03-18-2007, 11:10 AM
I will be changing couple angled bezels on my 04 22c. DOes anyone have any tips? I appreciate your help.

MOP
03-18-2007, 01:35 PM
My opinion it is a lot easier to pull the dash there are disconnect plugs back there just need to cut a few wire ties and maybe unscrew a couple of plastic clamps, do the job then put it back in. It is a real pain to work from down under, on the soft material on bench you can do it better.

Phil

Schaf
03-18-2007, 07:14 PM
thanks anyone else have any suggestions?

yeller
03-18-2007, 08:18 PM
MOP, Schaf has an 04. There is no dash panel to remove.

The bezels should be no problem to replace. Take a look behind the dash. All you have to do is disconnect the wires to the gauge, remove the strap holding the gauge in place and pull gauge out from the front. The bezel should just slide off, then reverse the process.

MOP
03-18-2007, 08:31 PM
Old boat old guy old ideas!

margo
03-20-2007, 09:37 AM
yeller is right...I take out the seats for more room get a pillow for my head a good light and get on my back and take a nap not really but try to get comfortable because there is not much room to work....Joe

CHACHI
03-20-2007, 10:50 AM
thanks anyone else have any suggestions?
Disconnect the battery and change one gauge at a time.
Ken