88 alpha-1

[slacker]

1988 alpha 1 setup.....
the transom & floor in the donor boat(a chaparral bowrider) was rotten......
I have everything that I could strip off of the boat......
the mercruizer longblock went into the minx.....
everything worked fine when removed...
the ram for the powersteering got a little pitted from sitting out, manifolds have a small crack between center ex ports...
outdrive, ss prop, gimbal housing, transom stuff, rams for power tilt, tilt pump, ex manifolds, flywheel, bellhousing, coupler etc.....
some of the hardware probably is missing due to a move
shipping would probably be bucks up, but I am willing to pallet it up & have your trucking company pick it up from my work
make me a reasonable offer!
located in charlotte, nc 28278
thanks
slacker

[Jerry Eisele]

Price and Pic??

[bryanpogue@edinarealty.com]

I have a 86 z29 and it needs the upper part of lower unit including bell
housing. would yours work,do you have any pics ? thanks

[Choprpilot]

I have a Merc bellhousing and Inspection plate If your interested. Its off a 1987 350 SB chev mercruiser alpha one If your interested, Contact: choprpilot1@aol.com

[slacker]

I think that the 88 stuff is the same as '86....
e-me slacker1965@juno.com if you are still looking....
thanks
kevin