PDA

View Full Version : Alpha Gen II



Sam
12-14-2006, 09:40 PM
Alpha Gen II, 1.47 gear ratio, clean and solid, fresh water only, drive shower. It's been Idle for a couple of years and I need to make some room. $1,000.00 OBO plus shipping.

Lenny
12-14-2006, 10:14 PM
Transom assembly, or just the leg :) ?

Sam
12-14-2006, 10:24 PM
No transom assembly, drive shaft on down.

Sam
01-04-2007, 05:48 PM
Alpha Gen II, 1.47 gear ratio, clean and solid, fresh water only, drive shower. It's been Idle for a couple of years and I need to make some room. $1,000.00 OBO plus shipping.

Bumpy Bumpy :wink:

Boatnuts
01-05-2007, 12:20 PM
Lenny - I have a couple Alpha 1 / MR transom assemblies (inner & outer) complete with trim pumps that were fully functional when I pulled them off my project boat last September. They could use a fresh coat of paint

bryanpogue@edinarealty.com
10-02-2007, 03:35 PM
Lenny - I have a couple Alpha 1 / MR transom assemblies (inner & outer) complete with trim pumps that were fully functional when I pulled them off my project boat last September. They could use a fresh coat of paint
do you still have the alfa 1 with transom,all complete ? thanks Bryan

Sam
10-08-2007, 07:07 PM
Bump again !

P.S. If you have something to sell create your own post or send a PM......don't clutter up an exiting post.