PDA

View Full Version : Moving A Z25 one Piece at a time



gfunkenterprises
11-28-2006, 09:15 PM
This weekend I moved the top half of my Z25 143 miles to my new shop. The hull and its trailer went the week before. Basically just picked up the top with a spread bar and some ratchet straps and set it on my triple axle flatbed, cribbed it up, and straped it down. It pulled down the road like a dream. Had alot of questions at the gas stations from onlookers. Here are some pics of the move, thought some of you guys would be interested.

Thanks
Bryan

gfunkenterprises
11-29-2006, 08:20 PM
Finish glassing in the new stringers and new plywood in the transom gel her and drop in the new 496.

Thanks Bryan

DAULEY
12-01-2006, 06:46 AM
did you cut out the cabin liner

gfunkenterprises
12-01-2006, 08:15 AM
Right now i have just removed the stringers to the tank, the tank and the two inner pieces of the transom due to rot. Donzigo suggested I support the boat in four places and get her off the trailer before I go any farther. Whats your definition of cabin liner. This is my first time at something like this due to the lack of anybody here that does extensive fiberglass work. Any help would be greatly appreciated.

Thanks Bryan