PDA

View Full Version : chips for the motor



whitedevil
11-22-2006, 09:46 PM
Does anybody out there make a chip for the motor to give you more horse power like the make for cars and trucks

LKSD
11-23-2006, 08:25 AM
Does anybody out there make a chip for the motor to give you more horse power like the make for cars and trucks

In one word.. NO..

They must be sent out to be reflashed. Also the later PCMs by Mototron, or motorolla Like the PCM 555's need to be retrofitted to a MEFI 4 or earlier set up so that they can be changed..

Lastly reflashing an ecm on a boat alone will not get you a world of power difference on most applications even though there is a little room for play.. The biggest call for reflashing is when you make many internal engine mods, or some major external mods like a higher boost SC.. :)

Jamie / Lakeside

BigGrizzly
11-23-2006, 11:43 AM
We do the mototrons but like JW said you won't see much if any improvements without engine changes. truth is it is really aq waste of money for a stocker. Infact most minor mods don't need a change anyway, because the ECUs are set up fat anyway.