Donzi logos for embroidery

[ThunderMarineDave]

Hi

Does anyone have a hi res image (or even better a digitized image for embroidery) for this logo?

Thanks

-David

[Cuda]

When I did the Formula logo for my 302, I blew up a picture of it on my printer, then took it to a blueprint shop and had it blown up to the size I wanted, then cut the blueprint copy out, put it on posterboard, and cut it out. I took the cut out to my upholstery guy, who used it for a template for the vinyl.

[Sam]

Let me see if I can get my friend to digatize it for me. What substrate will you be sewing on ? Also give me the foot print (Size) you would like it to be.

Sam

[Lenny]

...Logos have a registered TM against them. DONZI has extended this to the Site through Scot Van A and his offerings in support of this place and his hard work. The stuff on Ebay is not sanctioned nor condoned.

If you want to do a commercial offering or sell some patches here or elsewhere with reference to, or supported/sold through here, I would check with Scott first.

Just my $.02...

[ThunderMarineDave]

I am using this to replace the logos on my seats (which are being recovered).

It is not for resale.

The size are 3/4x4 for the headrests, and 1.5x8 for the rear seat.

-David