427 sbc motor

[big bore]

i have a new bill michell {world products} 427 sbc short block with oil pan, timing cover ,custom ground hyd marine roller cam from comp cams. BILLET steel timing set - hardened billet steel with Torrington bearing,and a victor jr port matched intake. just bolt on your heads. this should make well over 500 hp with a good set off heads
i have over 4200.00 in it. ASKING 3500.00 OR BEST OFFER.
must sell going with big block and its all most done

[DonCig]

Cam Specs Please.

Don

[big bore]

ill have to call comp cams tomarrow and get specs it was a custom ground cam

[big bore]

the #s on the cam are
31945 31965
hr112+4
c1363
intake 230 ex 336 @50 intake 583 ex 586 on 112 center line