PDA

View Full Version : Question, I'm pulling my engine Saturday



vonkamp
07-13-2006, 03:18 PM
Okay, I got my engine ready to pull. What is the best way to unbolt the rear of the engine? I could unbolt at bell housing (1st pic), I guess thats a transmission housing (2nd pic), or from the back, pulling every thing at once (3rd pic). I just plan on rebuilding (or replacing) the engine.

Any advice would be greatly appreciated.
Thanks,
Baron

mrfixxall
07-13-2006, 04:35 PM
just unbolt the engine from the bellhousing in the first pic..

If you try to take the engine out with the bell housing on you wont get it out unless you tilt the motor way back and nose up,straight up...

Also whyle you have it apart you may want to replace the bearings and seals in the bellhousing...

vonkamp
07-14-2006, 08:02 AM
Okay, will do. Thanks for the guidance.
Cheers,
Baron