Replacement flame arrestor

[David Ochs]

I've been searching the internet for a replacement flame arrestor. Look at this picture and you'll see that what I have is an embarrasement. It's just all beat up.
http://www.donzi.net/hull/562/ochs9.jpg
The one's I've found from such places like "Rex Marine" in stainless all appear to be too tall. I'm happy to have the aluminum OEM replacement like what I have.
The inside diameter of the bore is 5" and the total over height is 2". Any taller and I don't think it will clear the hatch.
Thanks for the help.
Dave

[MOP]

You need to poke around a boat yard or two there has to be some clunkers that still have an arrester on them.

Phil

[David Ochs]

Acutally Phil, that is where this one came from and I've been looking at the peice of crap for way too long. Got to find a new one. I'll just keep lookin'.

[MOP]

Dave you should probably go after market, the one you have is about as good as they get not a thing of beauty even when new just does the job.

[DonCig]

David, Gaffrig makes a couple of 2" models.
An aluminum one for $29.00 and a 10" stainless for $175.00.

http://www.danamarineproducts.com/store.cfm?CatId=116&CFID=155538&CFTOKEN=55946786

Don

[rustnrot]

My favorite is the 215-16 at
http://www.eddiemarine.com/cart/details.asp?SubCategoryID=83&CategoryID=34

It just fits under the hatch on yesyoucan's 16 classic v drive.