gcarter
05-23-2006, 01:17 PM
I only use two belts.
I don't have a belt driven raw water pump or circulationg pump.
My (not really a) problem is that with the existing belts with only two pulleys each, the belts are hard to tighten.....see photo, note the hoist hook is in the P/S bracket.
So, I'm wondering if there is an existing P/S, alternator bracket that has the pulleys in the same plane, or, are there after market conversion kits for serpentine belts?
http://www.donzi.net/forums/attachment.php?attachmentid=20477&d=1146928687
I don't have a belt driven raw water pump or circulationg pump.
My (not really a) problem is that with the existing belts with only two pulleys each, the belts are hard to tighten.....see photo, note the hoist hook is in the P/S bracket.
So, I'm wondering if there is an existing P/S, alternator bracket that has the pulleys in the same plane, or, are there after market conversion kits for serpentine belts?
http://www.donzi.net/forums/attachment.php?attachmentid=20477&d=1146928687