springs
04-20-2006, 11:28 AM
Baby on the way. Gotta make room in the budget for day care.
89’ 22 Classic Teal & White. Brand new SS Competition gauges. Hot Foot. Galvanized Trailer. cockpit cover. King Cobra outdrive. Gelcoat needs a good buffing. w/o power $7500
Engine Specs
Ford 460 over .060 Internally Balanced
Probe 11cc dished piston
Ford Racing I-beam rods (stock length)
Trick Flow 429/460 Street aluminum cylinder heads
• 74cc
• Intake 2.20 / Exhaust 1.76
• Bowls have been polished
• 290 cc intake port volume / 130cc exhaust port volume
Trick Flow cast aluminum valve covers
Ford Racing aluminum rockers
Jomar Gold stud girdles
Edelbrock Victor 460 intake maninfold
Marine Demon 850cfm carb
CMI headers
Eddie Marine BBC to BBF aluminum exhaust converters
Lunati custom cut solid flat tappet
Isky Special Oiling solid lifters
K&N flame arrester
Ford Racing bearings throughout
This engine has 0 hours. Still on engine stand. Professionally assembled by Superior Machine in Covington, GA. Entire valve train, heads, carb and rotating assembly are new except for crank . Have not had the engine dyno’d but engine I mocked makes over 700+ HP. I've got over 10K in this motor build. w/ power $16,000
Will post photo's tonight.
89’ 22 Classic Teal & White. Brand new SS Competition gauges. Hot Foot. Galvanized Trailer. cockpit cover. King Cobra outdrive. Gelcoat needs a good buffing. w/o power $7500
Engine Specs
Ford 460 over .060 Internally Balanced
Probe 11cc dished piston
Ford Racing I-beam rods (stock length)
Trick Flow 429/460 Street aluminum cylinder heads
• 74cc
• Intake 2.20 / Exhaust 1.76
• Bowls have been polished
• 290 cc intake port volume / 130cc exhaust port volume
Trick Flow cast aluminum valve covers
Ford Racing aluminum rockers
Jomar Gold stud girdles
Edelbrock Victor 460 intake maninfold
Marine Demon 850cfm carb
CMI headers
Eddie Marine BBC to BBF aluminum exhaust converters
Lunati custom cut solid flat tappet
Isky Special Oiling solid lifters
K&N flame arrester
Ford Racing bearings throughout
This engine has 0 hours. Still on engine stand. Professionally assembled by Superior Machine in Covington, GA. Entire valve train, heads, carb and rotating assembly are new except for crank . Have not had the engine dyno’d but engine I mocked makes over 700+ HP. I've got over 10K in this motor build. w/ power $16,000
Will post photo's tonight.